Medium Carbon Steel Turned Parts

Medium Carbon Steel Turned Parts With Threaded End Holes

CNC lathe processing. First, use a U drill to make holes, then use a tungsten-carbide boring cutter with R0.4 corner to drill internal holes, then use a tungsten-carbide boring cutter with R0.2 corner to finish internal holes, then use a cylindrical cutter with 55°R0.2 corner to process the end face and the outer diameter, finally cut off, and then use CNC machining center, a flat cutter to process the plane, a D5.0 * 90° center drill to center, a tungsten-carbide twist drill to process the M2.5 thread bottom hole, and M2.5 tapping to process the thread, Then change the end of the product to continue processing.
Double-sided Misaligned Threaded Holes With A Flatness Of 0.05 Or Less Are Available For Use In Pumps And Valves.The Flange Connection Is Easy To Use And Can Withstand Large Pressure. Flange Connection Is Widely Used In Industrial Pipelines. In The Family, The Pipe Diameter Is Small And At Low Pressure, And Flange Connections Are Not Visible. If In A Boiler Room Or Production Site, There Are Flange Connections Everywhere For Pipes And Equipment. According To The Connection Method Flange Connection Types Can Be Divided Into: PL, SO, WN, SW, Th, BL, PJ/PE, PJ/JR…